Payment & Shipping Terms:
|Type:||Carbon Fiber Infrared Heating Lamp||Warranty:||10,000 Hours|
|Reflector:||Gold/Ceramic/Clear Reflector||Application:||Used In All Kinds Of Industry Heating Process|
|Material:||Quartz Glass & Carbon Fiber||Shape:||Straight|
carbon infrared heater,
carbon fiber infrared heating element
No.1 Product Descriptions
This is made up of 8-shape high-purity clear quartz twin tube, each tube has Heating Coil of carbon fiber material which runs in U shape in the tube which is filled with inert gas.
Power Density up to 150w/cm is achieved. Heating up and cooling down time is approximately 3-5 seconds.
These heaters are available with gold or white reflector and without reflector.
Reflector is in the form of gold coating on outer rear side of the tube, due to reflector heat loss from backside is prevented and thus power saving is achieved, and also results in making surrounding work area cooler and increases the efficiency and directionality of the heater.
Parameters of Carbon fiber IR Emitters
|Diameter||10, 10.5, 11,12, 13, 15, 18mm|
|Lead wires length||500mm(standard length)|
No.2 Specific Applications Examples
Infrared heating is a kind of radiation heating. It spreads by a kind of infrared radiation (light)-- infrared light from material in the form of molecular (atomic) resonance absorption, so as to achieve the purpose of heating. It can be applied in many fields such as the heating process of industry coating, plastic forming, automotive industry, glass making, spinning, solar PV, food baking, drying of printing inks, quick drying of primer and paint on furniture, printed circuit, and so forth.
No.3 Brief Introduction of Coating
Benefits of Coating
1.All of our emitters can be coated with a layer of gold or ceramic as reflectors. The gold/ ceramic coating can concentrate the heat, increasing the effectiveness of the heat output.
2. The emitters with coating are highly economical, converting practically all the consumed
electrical power into heat.
3.For the emitters with high watt density or the surface temperature of the tube above 800°C , we suggest to use ceramic coating as reflector because the temperature resistance is up to 1000°C .
In addition to 180°(half-tube) coating, we also manufacture 270° coating or other customer specified degrees.
Forms of expression of Coating
No.4 Quality Service
Our Infrared heater lamps are under standard in CE & ROHS, we have strict quality control to make sure each IR lamp is perfect!
Some samples are free of charge, buyer shoulder the fright cost.
1. All of our infrared heater lamps are customized according to your unique practical request, professional technicians do one-to-one service for you and can customize 1pc IR lamp for your quality testing at the beginning.
2. We offer OEM services, we can print your logo on Infrared heating lamps as your requirements.
Warranty Time of Short wave Infrared heat lamp: 5,000 hours
Warranty Time of Carbon Fiber Infrared heat lamp: 10,000 hours
Warranty Time of Medium wave Infrared heat lamp: 20,000 hours
During the warranty time, any non-man-made quality issue, once confirmed, we will sent the new replacement immediately without any charge.
No. 5 FAQ
1. What is the payment term?
prepayment 100% advance via wire transfer, Paypal, Western Union
2. Could you provide sample for performance testing and appearance checking?
Yes, we can provide the sample based on your required specs.
3. What information should i provide when enquire?
Lamp’s type, Total length,Heating length ,Wattage,Voltage,Ceramic end connection ,Lead length in mm (Standard lead wire length 300 mm),Coating available - Gold coating / Ceramic coating, quantity, it couldn’t be better if there is drawing or picture can be provided.
But if it is a new project or it is the first time for you to use infrared emitter, just tell us about your application in details like object material, required working temperature, required time, heating size.
NOTE: customized lamps available on request.
Contact Person: Grace Yin