Payment & Shipping Terms:
|Type:||Electrical Heater Parts||Warranty:||20,000 Hours|
|Wavelength:||2.6-3.5um||Material:||Quartz Glass And Nichrome Wire|
|Application:||All Kinds Of Industrial Heating Processes||Installation:||OEM, Horizontal|
quartz halogen infrared heater lamps,
infrared quartz tube
No.1 Product Descriptions
We manufacture and supply superior quality medium wave infrared heater that consists of a helically wound resistance coil housed in a pure vitreous silica fused quartz tube. The quartz tubing is terminated with ceramic insulating caps that are specially designed to allow the quartz tubing to breathe. The ceramic caps are tightly fastened to the quartz tube with high temperature cement that allows the quartz to breathe. Made of high quality material, these are superior in performance and offer long serving life.
The filament temperature of a medium wave emitter is from 850°F and 2150°F (454°C - 1177°C). The majority of energy generated by the medium wave lamps is in the range of the electromagnetic spectrum between 2-4 microns. Medium wave emissions do not penetrate as deep into substrates as shortwave. The emissions are readily absorbed by water films, plastics and many solvents.
Parameters of Medium wave Infared emitters
|Diameter||12, 13, 15, 18mm|
|Lead wires length||500mm(standard length)|
No.2 Brief Introduction of Coating
Benefits of Coating
1.All of our emitters can be coated with a layer of gold or ceramic as reflectors. The gold/ ceramic coating can concentrate the heat, increasing the effectiveness of the heat output.
2. The emitters with coating are highly economical, converting practically all the consumed
electrical power into heat.
3.For the emitters with high watt density or the surface temperature of the tube above 800°C , we suggest to use ceramic coating as reflector because the temperature resistance is up to 1000°C .
In addition to 180°(half-tube) coating, we also manufacture 270° coating or other customer specified degrees.
Forms of expression of Coating
No.3 Quality Service
Our Infrared heater lamps are under standard in CE & ROHS, we have strict quality control to make sure each IR lamp is perfect!
Some samples are free of charge, buyer shoulder the fright cost.
1. All of our infrared heater lamps are customized according to your unique practical request, professional technicians do one-to-one service for you and can customize 1pc IR lamp for your quality testing at the beginning.
2. We offer OEM services, we can print your logo on Infrared heating lamps as your requirements.
Warranty Time of Medium wave Infrared heat lamp: 20,000 hours
During the warranty time, any non-man-made quality issue, once confirmed, we will sent the new replacement immediately without any charge.
No.4 Packing & Shipping
No. 5 FAQ
1. What is the payment term?
prepayment 100% advance via wire transfer, Paypal, Western Union
2. Could you provide sample for performance testing and appearance checking?
Yes, we can provide the sample based on your required specs.
3. What information should i provide when enquire?
Lamp’s type, Total length,Heating length ,Wattage,Voltage,Ceramic end connection ,Lead length in mm (Standard lead wire length 300 mm),Coating available - Gold coating / Ceramic coating, quantity, it couldn’t be better if there is drawing or picture can be provided.
But if it is a new project or it is the first time for you to use infrared emitter, just tell us about your application in details like object material, required working temperature, required time, heating size.
NOTE: customized lamps available on request.
Contact Person: Grace Yin