Payment & Shipping Terms:
|Type:||Carbon Fiber Infrared Heating Lamp||Wavelength:||1.4-2.6um|
|Voltage:||80-750V||Diameter:||10, 11, 12, 13, 15, 18mm|
|Reflector:||Ceramic, Gold And No Reflector||Overall Length:||100-2000mm|
|Heated Length:||50-1950mm||Application:||Used In All Kinds Of Industry Heating Process|
|Material:||Quartz Glass & Carbon Fiber||Shape:||Straight|
No.1 Product Descriptions
This is made up of 8-shape high-purity clear quartz twin tube, each tube has Heating Coil of carbon fiber material which runs in U shape in the tube which is filled with inert gas.
Power Density up to 150w/cm is achieved. Heating up and cooling down time is approximately 3-5 seconds.
These heaters are available with gold or white reflector and without reflector.
Reflector is in the form of gold coating on outer rear side of the tube, due to reflector heat loss from backside is prevented and thus power saving is achieved, and also results in making surrounding work area cooler and increases the efficiency and directionality of the heater.
Filament Structure of Carbon fiber IR emitters
Benefits of Coating
1.All of our emitters can be coated with a layer of gold or ceramic as reflectors. The gold/ ceramic coating can concentrate the heat, increasing the effectiveness of the heat output.
2. The emitters with coating are highly economical, converting practically all the consumed
electrical power into heat.
3.For the emitters with high watt density or the surface temperature of the tube above 800°C , we suggest to use ceramic coating as reflector because the temperature resistance is up to 1000°C .
In addition to 180°(half-tube) coating, we also manufacture 270° coating or other customer specified degrees.
Forms of expression of Coating
No.2 Specific Applications Examples
Solar PV industry for preheating, soldering, heating process in many kinds of stringers, furnace, ovens and PECVD equipment, etc.
PET preform heating in Stretch blow moulding machines
Powder coating curing
Resins Hardening, Rubber coating drying
Adhesives - End polymerization
Food - Pasteurization / Sterilization
Paper Industry - Humidity Control
Industrial Drying - Paint , Varnishes , Dyeing
Semi Conductor Industries - Heating of wafers
Printing - Printing ink drying in screen and offset machines
Drying of Water-Repellent Coating on Fabric
Textile Embossing and Laminating
No.3 Why Infrared?
|Advantage of infrared heater|
|energy saving||Infrared radiation unlike convection or conduction, dose not rely on any medium to transfer heat from infrared source to the object being heated, heat directly to the object|
|no need medium transferring and quick response, heating by infrared emitters can reach working temperature more quickly than other forms of heating and therefore reduces process times, and increases production rates.|
|space saving||small size|
|Labor saving||Easy installation, no maintenance, no extra manual operation for infrared heating emitters.|
energy saving, so cost saving;
human cost saving: easy installation, reliable operation, low maintenance costs
|Better product quality||Controllable, predictable heating reduces wastage and promotes products quality|
Clean, and no any pollution released to the surroundings
1. What is the payment term?
prepayment 100% advance via wire transfer, Paypal, Western Union
2. Could you provide sample for performance testing and appearance checking?
Yes, we can provide the sample based on your required specs.
3. What information should i provide when enquire?
Lamp’s type, Total length,Heating length ,Wattage,Voltage,Ceramic end connection ,Lead length in mm (Standard lead wire length 300 mm),Coating available - Gold coating / Ceramic coating, quantity, it couldn’t be better if there is drawing or picture can be provided.
But if it is a new project or it is the first time for you to use infrared emitter, just tell us about your application in details like object material, required working temperature, required time, heating size..