W shaped short wave infrared heater lamps 1500w 230v for paint curing
Color temperature 1600~2500 °K
IR wavelength between 1 to 2μ
Using tungsten wire as filament
Response time around 1~2 seconds
Average working life 5000 hours
Gold or ceramic coating at rear side as reflectors
Vertical and horizontal emitters are available
Brief introduction of Short Wave IR Heater
Short wave quartz infrared heaters are used in various industrial applications. It contains tungsten filament, helically wound, encased in quartz envelope. Tungsten as resistive element is capable of generating temperature in excess of 2750℃. Its response time is very rapid in 1 second it emits over 90% of IR energy. It is by products free & pollution free. Heat focus is very accurate due to compact and narrow diameter of IR tubes. Short wave IR element has maximum heating rate of 100w/cm.
The quartz envelope allows transmission of IR energy and protecting the filament from convective cooling and corrosion. Addition of small percentage of halogen gas in it not only increases life of emitter but also protects blackening of tube and depreciation on infrared energy. The rated life of short wave infrared heater is around 5000 hours.
Advantages of Infrared Radiation
||Infrared radiation unlike convection or conduction, dose not rely on any medium to transfer heat from infrared source to the object being heated, heat directly to the object
|no need medium transferring, quick response,can reach working temperature more quickly, heating by infrared emitters shortens process time and increases production rates
||low capital cost, easy installation, reliable operation, low maintenance costs and efficient use of energy.
|Better product quality
|Controllable, predictable heating reduces wastage and promotes products quality
|Clean, and no any pollution released to the surroundings
1.All of our emitters can be coated with a layer of gold or ceramic as reflectors. The gold/ ceramic coating can concentrate the heat, increasing the effectiveness of the heat output.
2.The emitters with coating are highly economical, converting practically all the consumed electrical power into heat.
3.For the emitters with high watt density or the surface temperature of the tube above 800℃ we suggest to use ceramic coating as reflector because the temperature resistance is up to 1000℃. In addition to 180°(half-tube) coating, we also manufacture 270° coating or other customer specified degrees.
PET preform heating in Stretch blow moulding machines
Powder coating curing
Resins Hardening, Rubber coating drying
Adhesives - End polymerization
Food - Pasteurization / Sterilization
Paper Industry - Humidity Control
Industrial Drying - Paint , Varnishes , Dyeing
Semi Conductor Industries - Heating of wafers
Printing - Printing ink drying in screen and offset machines
Drying of Water-Repellent Coating on Fabric
Textile Embossing and Laminating
Why choose us
1. The materials used for our lamps are at good quality approval UL testing
2. As a manufacturer of infrared lamps over 10 years history, and we have experienced workers, half of them have worked for us over 5 years
3. We are factory, so we can control the delivery date, material, quality directly
4. For any exclusive-human damage within warranty time, we will delivery the replacements within 3-5 work days once confirming
5. Safe package to protect lamps from being broken during shipping
6. we will provide you the lamp’s holder free of charge ( 2 units clamps for 1 piece lamp)
7. Various Payment methods like wire transfer, paypal, western union
8. Shipping ways provided including DHL, Fedex, TNT, UPS, air, sea
1. how to place the order?
Let us know your required lamp specifications including lamp type,diameter, length, power, voltage,reflector...then we send you the
quotation,after payment,production will be started, after finished, they will be shipped to your side.
2. What is the payment term?
prepayment 100% advance via wire transfer, Paypal, Western Union
3. could you supply clamps for lamp installing ?
Yes, we will provide mounting clamps for clients, and the corresponding clamps quantity with purchased lamps are supplied freely bu us.
4. Have an unusual design?
Send us a drawing, sketch, or sample and we'll be happy to quote it.
We specialize in small runs and custom designs, but can be highly competitive on large orders as well.
5.How does your factory do quality control
" quality is priority", we always and keep paying more attention to QC from the material purchasing to the lamps' packing. Our product have gained
CE, ROHS, ISO9001.